What to do if my SIGMA SPORT Bicycle Accessories has no display?
If your SIGMA SPORT Bicycle Accessories device shows no display, first check the battery status. Ensure the battery is inserted correctly with the + side facing up. Also, inspect the battery contacts and carefully bend them if they appear to be in poor condition.
Why is there no speed display on my SIGMA SPORT Bicycle Accessories?
If you're not seeing a speed display on your SIGMA SPORT Bicycle Accessories, consider the following: * Ensure the computer is correctly attached to the bracket. * Check the contacts for any signs of oxidation or corrosion. * Verify the distance between the magnet and transmitter is no more than 12 mm. * Confirm that the magnet is magnetized. * Check the battery status of the speed transmitter.
General| Type | Bicycle Computer |
|---|---|
| Transmission | Wireless |
| Heart rate measurement | Yes |
| Altimeter | Yes |
| Display | LCD |
| Battery | CR2032 |
| Functions | Speed, distance, calorie consumption, heart rate |
Details the components included in the product packaging.
Guidance on attaching speed, cadence transmitters and magnets.
Steps for setting up the computer for a second bicycle.
Methods for syncing speed, cadence, and heart rate data.
Procedure to select the preferred display language.
Procedure to select speed units (km/h or mph).
Inputting air pressure for altitude calibration.
Setting the current altitude for accurate readings.
Inputting the reference home altitude.
Methods to determine and input the correct wheel size.
Entering wheel size for specific bikes.
Procedure to set the current time.
Inputting user's age for personalized data.
Inputting user's weight for personalized data.
Inputting user's gender for personalized data.
Entering total distance for bike 1 or bike 2.
Entering total trip time for bike 1 or bike 2.
Entering total altitude for bike 1 or bike 2.
Adjusting the display contrast for readability.
Procedure to save settings and exit the setup menu.
How to turn the display backlight on and off.
Display of speed comparison indicators.
Controlling the visibility of cadence and heart rate data.
Process to recalibrate the home altitude setting.
Using the built-in stopwatch feature.
Using the countdown timer feature.
Tracking ascent and descent during a trip.
Configuring trip climb and descent tracking.
Procedure to reset specific display data.
Viewing cumulative totals for each bike.
Information about the service interval indicator.
Activating and exiting transport mode.
Connecting the computer to a PC for data transfer.
Information on the optional cable-connected bracket.
Explanation of altitude measurement principles.
Methods for calibrating altitude readings.
Using sea level air pressure for altitude calibration.
Overview of the device's hiking capabilities.
Syncing with chest belt for hiking.
How to set and start the hiking time.
Setting a target duration for hiking activities.
Resetting hiking data.
Managing heart rate display in hiking mode.
Table of default, minimum, and maximum values for functions.
Instructions for replacing the computer and transmitter batteries.
Solutions for common issues with the device.
Details regarding product warranty and exclusions.
To Next Page
