To use under electric power, switch on at
the key switch on the side of the battery,
then press and hold the DOWN button on
the handlebar LED display until the blue
lights are seen.
To turn off the LED and the power to the bike, press and hold the
DOWN button for 2 seconds.
If the power is left on for an extended
period and the bike is not used, then
the power will automatically be turned off.
To fully turn off the power, switch off at the key switch on the side
of the battery and remove the key for security.
By means of the three buttons, UP, DOWN and
6 Km/h, on the handlebar mounted display unit,
the various functions of the power controller can
be utilised.
See the following sections for details.
To Next Page
Loading...