General remarks Solving problemsখ খ
Battery:
1 lithium button cell
2032, 3V
Battery change is
displayed on screen.
Change battery:
• When the battery is changed the
WHEEL SIZE, LANGUAGE, KMH/MPH,
TOTAL KM and TOTAL TIME are saved
and need not be re-entered.
• Observe direction of plus and minus
poles; when the compartment is open
you must see the PLUS side of the
battery!
• If sealing ring is loose, re-insert it.
• After changing the battery only the
time must be re-entered.
Warranty
We are liable for damages in accordance with
the statutory regulations in respect to our
contractual partners.
If you have a question in regards to warranty,
please contact the dealer where you bought
the bike computer. You can also send the bike
computer with your proof of purchase and all
accessories to the following address.
SIGMA SPORT USA
1067 Kingsland Dr.
Batavia, IL 60510
Toll free: 888-744-6277
E-Mail: sales@sigmasport.us
If your guarantee claim is justified you will receive
a replacement device. You only have a right to
the current model at the time. The manufacturer
reserves the right to make technical changes.
MPH no display
• Metal Sleeve pushed over magnet (cf. Fig. 9)?
• Old handlebar holder with radio transfer
(RDS) used?
• Computer correctly twisted into holder?
• Contacts checked for oxidation/corrosion?
• Cable from holder comes towards rider?
• Cable checked for breaks?
• Distance between magnet and sensor (max 5 mm)
• Checked whether magnet is magnetized?
No display (screen blank)
• 2 magnets installed?
• Magnet positioned correctly?
• Wheel size set incorrectly?
MPH wrong display
• Check battery
• Battery inserted correctly (plus and minus)?
• Battery contact ok? (bend carefully!)
Display black/changes slowly
• Temperature too high (>60°C) or too low (<0°C)
To Next Page
Loading...
