Sigma ROX 12.1 EVO - ANT+ REMOTE CONTROL OPTIONS; ASSIGNING FUNCTIONS TO REMOTE BUTTONS; E-BIKE CONNECTIVITY; PAIRING AND COMPATIBILITY CHECK

DE
1. USB-Abdeckung öffnen. 2. USB-C-Kabel einstecken.
Kabel und Anschluss müssen dabei trocken sein!
3. Laden Sie das Gerät auf.
WICHTIG: Bitte stelle sicher dass das USB Cover immer
geschlossen ist bevor du ein Training startest.
FR
1. Retirez le cache du port USB. 2. Connectez le câble USB-C.
Lecâbleetleportdoiventêtresecs!3. Chargez l‘appareil.
IMPORTANT! Assurez-vous que le cache du port USB soit
toujours fermé avant d‘utiliser l‘appareil.
CHARGING
EN
PC USE
OR
AC/DC
1 2
3
1
Open USB Cover.
2
Insert USB-C cable.
Check that the cable and port are dry!
3
Charge the device.
!
IMPORTANT : Please ensure that the USB cover is always closed before starting a training session.
!
NOTE :
To get to optimum charging time, a charger with
min. 1500mA should be used. Please make sure,
that you don‘t use a charger that exceed the max.
of 3000mA, as it could damage the device.
5V max.
3000mA
USB-C
081070-1_SIGMA-ROX-12-1-EVO-Kurzanleitung-130x100mm_quer_SP1.indd 25081070-1_SIGMA-ROX-12-1-EVO-Kurzanleitung-130x100mm_quer_SP1.indd 25 09.03.2023 12:42:0409.03.2023 12:42:04