After each automatic lap or manual lap, this popup training page shows you the training values of the
completed lap. You can easily set the values to be displayed via the RideApp or the ROX 12.1 EVO. More
about this under Setting sport profiles
SHIMANO DI2 SHIFTING
The ROX 12.1 EVO can be connected and also controlled* with Shimano Di2 electronic shifting. When
their Di2 is connected to the ROX 12.1 EVO, different values can be displayed, which you can display in
any training view. The following values can be displayed:
– Di2 Mode
– Di2 battery status
– Gear position for chainring and sprocket
– Gear ratio
– Gears as a graphic with the information of the number of teeth and the gear ratio
NOTE: The ROX 12.1 EVO also supports the Shimano D-Fly Channel. These can be used to conveniently
operate your ROX 12.1 EVO via the built-in remote control buttons. How to set them you can read in
chapter 7.2.1 Shimano Di2 / Sensor connect.
*for this purpose, a radio unit may be necessary. Please ask your dealer for more information
SMARTNOTIFICATIONS
By means of Smart Notifications you always stay on the current sand during a workout. The ROX 12.1
EVO can inform you about incoming calls/messages.
To receive Smart Notifications, allow the RideApp to access this data and set the Ok at Smart Notification
under Settings/Connections/RIDE App Connect.
Your ROX will then receive this data. You can also turn Smart Notifications on and off at any time during
your ride via the Short Menu.
DISPLAY PERFORMANCE DATA WITH THE ROX 12.1 EVO
The power meter has become indispensable in the field of training control. Therefore, the ROX 12.1 EVO
offers a wealth of data that help to perform a targeted and optimal training. The individual that are
available, you can see the function table.
Here you can see an example of how a training page with power and other training values configured. In
addition to the settings of the values, the individual fields can also be color-coded. So you can design your
training page according to your needs.
To Next Page
Loading...
