To change the mode, wait until the ROX 12.1 EVO has connected to the Smart Trainer and open the short
menu. Here, select the item FE-C mode to choose the desired mode. The mode can be changed at any
time.
ZOOM FUNCTION
By clicking on graphics like the map or the elevation profile, the zoom level of these can be adjusted. This
allows you to zoom in closer to the map or to select a larger section. The Auto Zoom function, which
automatically zooms the map to the next turn when navigation is active, can be set in the Map
management area.
INTERRUPT TRAINING / “PAUSE” FUNCTION
If you want to take a longer break, or record the round trip of a commute without creating two activities,
press the Stop button at the beginning of the break. Then press and hold the Home/Power button until the
Power menu appears. Here you have the option to set the ROX to “power save mode”. Here, all power-
intensive functions are reduced. To wake up the ROX 12.1 after the break, simply press the Home/Power
button.
NAVPAGE
To Next Page
Loading...
