8
8.4) MACHINE OPERATION: CONTROLS
1) Master circuit breaker with mains signal lamp.
2) Control lever and motion reverse.
3) Control pedal and motion reverse (upon request).
4) Adjusting lever for fining down.
5) Trigger for lever 4
6) Ratchet of lever 4
8.5) SAFETY WARNINGS:
Space around the machine must be properly lighted,
clear and clean.
Stuff must wear appropriate clothes for operating the
machines, antislip shoes (if necessary protected on toe),
sleeves properly buttoned up on wrists, no dangling
clothes such as ties, napkins, ripped clothes, open jackets, etc, to avoid any risk of getting
tangled.
8.6) EARTHING: it is compulsory to check proper working of the machine
earthing. A faulty connection can cause dangerous accident, even death.
8.7) ELECTRIC CABINET, GENERAL REQUIREMENTS :
Unauthorised personnel cannot open the electric cabinet. Always watch over
the machine when the electric parts are exposed. Machine operation when the
electric parts are exposed is allowed only when specialised personnel is
present, only for the short period necessary for possible repairs and under the
responsibility of the user.
To Next Page
Loading...