Sigma TAURO 40 - Adjustment and Commissioning Operations; Description of the Adjustment and Commissioning Operations; Installation

Instructions, use and maintenance manual Pag. 24/48
TAURO 35-35PLUS-40-40PLUS
1) Insert the belt between
the scraper and the spiral.
11.2. Description of the adjustment and commissioning operations
11.2.1. Installation
The machine must be positioned vertically on a smooth surface and able to support the weight (floor
with resistance above 20 kgcm
2
). The walls, the table and the floor must be in good condition and easy
to clean.