Sigma TAURO 40 - System Checks and Routine Maintenance; System Checks; Routine Maintenance

Instructions, use and maintenance manual Pag. 30/48
TAURO 35-35PLUS-40-40PLUS
14.3. System checks
Periodically inspect the operation of machine automation and its earthing. Inspect the methods of operation, the
safety functions, the contacts on the terminal board and the integrity of the cables, of the luminous indicators and of
the earthing.
VERIFICATION:
INTERVAL METHOD
m F, M
14.4. Routine maintenance
Check the external components of the machine: tools, bowl, protection grid.
Check the belt wear after the first few months of processing.
Check bolt tightening of the entire machine
INTERVAL METHOD
m F,M