What to do if Signature Design by Ashley Indoor Fireplace does not work, but Power and Fireplace switches are in the “ON” position and thermostat is set on “99”?
Turn all switches to the “OFF” position and unplug the unit from the wall outlet for 5-10 minutes. After 5-10 minutes plug the unit back into wall outlet, and operate as normal.
What to do if the display unit on the Signature Design by Ashley Indoor Fireplace control panel shows “ ” and the function indicator is quick flashing indicating it is in alarm mode?
Unplug the unit from the wall outlet for 5-10 minutes. After 5-10 minutes plug the unit back into wall outlet, and operate as normal.
General| Product Name | Signature Design by Ashley EF30-30A |
|---|---|
| Category | Indoor Fireplace |
| Type | Electric Fireplace |
| Color | Black |
| Heating Area | 400 sq. ft. |
| Power Source | Electric |
| Voltage | 120V |
| Remote Control | Yes |
| Adjustable Flame | Yes |
| Flame Effect | LED |
| Thermostat | Yes |
| Overheat Protection | Yes |
| Material | Metal, Glass |
| Wattage | 1, 500W |
To Next Page
