6. SHELF PLACEMENT WARNING:
To ensure the oven shelves operate safely, correct placement of the shelves
between the side rail is imperative. Shelves and the pan only can be used between
the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during
careful removal of the shelf or tray, hot food items should not slide out.
OR
7. BULB REPLACEMENT
For replacement, process as follows:
a. Disconnect power from the mains outlet or switch
off the circuit breaker of the unit's mains outlet.
b. Unscrew the glass lamp cover by turning it counter-
clockwise (note, it may be stiff) and replace the
bulb with a new one of the same type.
c. Screw the glass lamp cover back in place.
NOTE: Only use 25W/230V, T300°C halogen lamps.
8. SECURING THE OVEN TO THE CABINET
a. Fit oven into the cabinet recess.
b. Open the oven door and determine the location
of the mounting screw holes.
c. Fix the oven to the cabinet with two screws.
To Next Page
Loading...