EN-22
CLEANING AND MAINTENANCE
1. Please shut off the power before cleaning of the appliance.
2. Clean the appliance until it cools down completely.
3. To remove dirt, please select illustrious detergent.
4. After removing dirt, please use neat wet cloth to clean the unit.
5. Do not cl ean by water directly, water gets inside may cause
malfunction.
6. Keep the crystal glass plate and pan clean before cook, otherwise
dirt after ch arring is very difficult to cl ean and the pl ate may get
discoloration.
7. You may clean air vent / air entry’s dirty by vacuum cleaner to suck
up. If there is dirt with oil, add a little illustrious detergent with tooth-
brush to clean.
8. Don’t use caustic impregnates to clean. It may damage the cooker
by chemical reaction. Do not use scrubbing brush or polishing powder to cle
an the induction cooker .
TROUBLE SHOOTING
Symptoms possible cause Solutions
No work and no
display
-Not connect power or
no electricity
Ensure the fuse box
and power switch
work are connected.
The display work
normally but no
work
-The problem of circuit.
Contact to after-sales
service department
Open one burner,
the display shows
"E0" with buzzing
-The pot not suitable for
induction cooking.
Change other
suitable pot.
The induction
cooker have taste
in the first time use.
-It is a new appliances.
Four pots are full of
water on the four
burners, cooking it for
half an hour.
To Next Page
Loading...
