25
If the atus LED does not light up when you press the
button, check the following:
●
The charger is o. Press and hold the button for
5 seconds to turn on the charger.
●
The charger's internal battery is too low to display the
atus. Connect the charger to an electrical outlet, wait
several minutes and try again.
Turning the charger on or o
When the charger is connected to an electrical outlet, it is
automatically turned on and cannot be turned o.
During mobile charging, press and hold the button for
5 seconds to turn the charger on or o.
To Next Page
Loading...
