4
RCNS2-114, Part Number 424125
RCNS2-34, Part Number 424200
TABLE OF CONTENTS
Safety Information 2
Specifications 4
Pneumatic Information 5
Tool Installation 9
Tool Operation 9
Sealer Jaw Rotation 10
Troubleshooting 11
Parts List & Exploded View 12
Maintenance 16
Declaration of Conformity 19
Signode tools and machines are designed
and warranted to work together with
Signode strapping and seals. Use of non-
Signode strap and seals and/or
manufactured or specified replacement
parts may result in strap breakage or joint
separation while applying strapping to a
load or during normal shipping and
handling. This could result in serious
personal injury.
Maximum operating pressure
is 90 psig (6.2 Bar)
To work effectively, the RCNS2 tool must
be properly installed. This installation
includes, in some cases, proper
suspension of the tool over the container
to be strapped and the proper placement
of the strapping dispenser to provide a
continuous easy supply of strapping for
the application.
SPECIFICATIONS
STRAP
MODEL TYPE WIDTH THICKNESS SEALS AIR PRESSURE
(psig)
RCNS2-114
MAGNUS
1- 1/4"
(31.75mm)
.025" to .031"
(.64-.80mm)
SP,114,I, OF, P
Max. 90 (6.2 Bar)
Min. 75 (5.2 Bar)
RCNS2-34
3/4"
(19mm)
34HOC, HC,
I, SHOC
To Next Page
Loading...
