Loading your Rolly
Follow these simple steps to load your product on to your Rolly.
Step 1 Put the stocking on your arm, make sure there are no wrinkles and that
the stocking is stretched up the arm.
Step 2 With the product stretched over your arm, put your hand through your
Rolly and roll your Rolly up to the top of your stocking.
Step 3 Pull the stocking over your Rolly by pulling downward. Then roll back
your Rolly slightly up your arm in order to tuck the top end of the
stocking under the base of your Rolly.
Step 4 Roll your Rolly to the end of your hand, winding down the stocking in the
process. Then remove your Rolly (with your stocking attached), from your
arm. Once nished winding it down, the toe area of your stocking at one
end will be visible.
21
LOADING YOUR ROLLY
Rolly
43
To Next Page
Loading...