2
Package Contents
• Vista MCE Remote
• USB receiver and USB extension cable
• Two AAA batteries
• Quick Installation Guide
Hardware Installation
In order for the Vista MCE Remote and USB receiver to work
properly, the existing USB host adapter must be working
properly. Simply plug the USB receiver into any USB port
and it is ready for use, no driver installation is needed.
The most important button is the Start MCE button. Press
the Start MCE button to launch Vista Media Center
application.
Start MCE button
Troubleshooting
When I press the a button on the remote, but nothing
happens. Make sure that the following is true:
1. You are pointing the remote control directly at the
receiver.
2. The USB sensor on the receiver is not covered up
and no natural or artificial light is shining directly
on it.
3. The remote control is within 33 feet of the receiver.
4. You have not minimized or exited Media Center. To
reactivate Media Center, move the mouse, and then
click anywhere in the Media Center window.
5. It takes time for Windows Vista
TM
to respond to
MCE Remote's initial command. It varies due to
different PC systems CPU speed.
To Next Page
Loading...