Baby car seat placement
• Read and follow the baby car seat
manufacturer’s user manual.
• Place the baby car seat in its correct
position and take the seat belt from
the back rest of the vehicle.
• Put the belt through the coloured
marks you will see on the baby
car seat and buckle the belt to the
lower part of the seat.
• Ensure that the belt is properly
xated by pulling on it, ensuring that
the seat does not move.
Attaching the child car seat with the
seat belt
• Place the seat belt and put it
through the child car seat, following
the car seat manufacturer’s
instructions.
• Ensure that the seat belt is not
twisted.
• Insert the belt buckle into the seat’s
fastener until you hear it click.
Children must ride with a restraint system
that is appropriate for their age, weight,
and height.
In any event, read and consider the
information and safety tips for using
children car seats.
WARNING
Wheels
Wheels and tyres
General observations
• If your vehicle has new tyres, drive
with extreme prudence for the rst
500 km.
• If you must drive on kerbs or
similar, do so slowly and, if possible,
with your wheels perpendicular to
the obstacle.
• Occasionally check whether the
tyres are damaged (holes, cuts,
cracks, or dents). Remove all foreign
objects from the tyre’s prole.
• Damaged wheels or tyres must be
immediately replaced.
• Keep the tyres from being soiled by
oil, grease, or fuel.
• If you have lost one of the valve
caps, replace it as soon as possible.
• Mark wheels before dismounting
them to keep the same rotation
direction when you reassemble
them.
Wheels 23
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V002)
To Next Page
Loading...
Need help?
General