SILENCE S04 User Manual

Turn signal lever and high beams
The desired option will be shown on
the instrument dashboard.
Move the lever toward each position.
Right turn signal or right parking
light.
Left turn signal or left parking
light
High beams on.
Flash: lever pressed down.
Fig. 105 - Turn signal lever and high beams.
To turn the selected function o,
return the lever to its initial position.
Using turn signals inappropriately, not
using them, or forgetting to turn them o
can confuse other road users.
This could lead to an accident with serious
consequences.
• Always warn when you are going to
switch lanes, pass, or turn, using the turn
signal soon enough beforehand.
• As soon as you nish changing lanes,
passing, or turning, turn the turn signal o.
Inappropriate use of high beams can cause
accidents and serious injury since high
beams can distract and blind other drivers.
WARNING
WARNING
• The turn signal only works when the car
is on.
• The high beams only work when low
beams are on.
• Under cold or wet weather conditions,
headlamps, rear lights, and turn signals
may be temporarily foggy on the inside.
This phenomenon is normal and has
absolutely no bearing on the life cycle of
the vehicle’s lighting system.
INFORMATION
1
2
3
4
68 Use
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V002)

SILENCE S04 Specifications

General

Brand	SILENCE
Model	S04
Category	Automobile
Language	English