on your stature.
• Protect children by using an appropriate
child seat and correctly adjusting the seat
belt.
• Sit correctly. Also advise your passenger
to sit correctly.
• Adjust your seat belt correctly.
• Tell your passenger to properly buckle
their seat belt.
Press the Start/stop button once.
Wait until the TFT screen lights up.
Check that all doors are closed (see light
on screen) and that your seat belt is
buckled. Press the brake pedal and keep it
pressed down during the following step.
With the selector >>> Page. 44,
choose your driving mode.
You will hear several beeps in a row.
The electronic parking brake is releasing.
The vehicle is ready to start driving!
Enter the applicable activation code (you
will hear 1 beep for each time you press).
By default (when the vehicle leaves the
factory), this is:
Press the Start/Stop button for 2
seconds. You will hear 2 beeps.
The process of starting up the vehicle
consists of the following steps:
Starting up the vehicle
The process of stopping the vehicle
consists of the following steps:
Stopping the vehicle
If not already engaged, the parking brake
will engage.
Hold the Start/Stop button down
for 1 second.
After 1 minute wait time (without
conducting any action such as opening a
door or braking).
The vehicle will be completely turned o!
Use 75
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V002)
To Next Page
Loading...
Need help?
General