Technical data
Relevant information
Introduction
The information provided in technical
data may dier, depending on the
optional equipment or the model
make, as well as in the case of special
vehicles and ttings for certain
countries.
The vehicle’s ocial documentation
data always takes priority.
Vehicle identification details
You can nd the vehicle identication
number (frame number) on the label
located on the front bonnet >>> Page.
64.
Open the bonnet to see the vehicle
identication number.
Weights
Empty weight, total weight, load
over axles
Optional ttings may increase the
empty weight, which means that the
possible useful weight decreases in
proportion.
Tyre pressure
Do not exceed the maximum authorised
mass. There is risk of accident and harm!
CAUTION
Fig. 131 - Vehicle identication label.
Driver
Driver +
Passenger
2 bar
2.2 bar
2.2 bar
2.5 bar
Occupants
MMTA*
MMTA* (front axle)
MMTA* (rear axle)
Front wheel
785 kg
334 kg
451 kg
Rear wheel
*MMTA: Technically Permissible Maximum Laden Mass
Information of interest 97
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V001)