EasyManua.ls Logo

Silencer 7919P - Remote Control Transmitters; Transmitter Identification; Security System Operation Basics; Arming the System

Silencer 7919P
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Welcome to the world of Silencer
®
automotive security. Silencer products have been designed to provide
years of trouble free operation.
The information enclosed will provide a ready reference of the operation and maintenance of your new
Silencer security system. The operating instructions enclosed are for different security system models.
Many of the functions are similar between the models but be sure to follow the instructions that pertain to
your model security system only. If you are not sure of the model of your security system, contact your car
dealer finance department and ask for the model number.
Remote Control Transmitters
“Using the Transmitter to Arm the Security System”
1. Exit the vehicle and close all entrances.
2. Press and release the button on the transmitter. The security system will respond as follows:
A. The horn/siren will chirp one time. (Applies to 6908A, 6918A, 7919P and 7921P but is an option for
6904A and 7904A)
B. The LED indicator will begin to flash at a steady rate.
C. The parking lights will flash one time. (Applies to 6908A, 6918A, 7919P and 7921P but is an option
for 6904A and 7904A)
D. The starter is deactivated which prevents the engine from being started.
E. All protected entrances are armed. (Applies to 6908A, 6918A, 7919P and 7921P Only)
F. The horn/siren will sound one additional time if the vehicle has delayed interior lights that stay on
after the door is closed. (Applies to 6908A, 6918A, 7919P, 7921P Only)
The security system is now fully armed!
The Silencer security systems can operate from any one of the four transmitters shown here. Locate the
transmitter that was supplied with your system and use the drawing as a ready reference while reading
through the operating procedures.
Security System Operation
Gray
Arm
Button
Gray
Disarm
Button
7955
Panic
Silent Arming
Red 2nd
Channel
Button
Arm
Button
Disarm
Button
6945
Silent Arming
Panic
Button
2nd
Channel
Button
Arm
Button
Disarm
Button
7945
Silent
Arming
Panic
Button
2nd
Channel
Button
6915K3
Arm
Button
Disarm
Button
Silent
Arming
Panic
Button
2nd
Channel
Button

Other manuals for Silencer 7919P

Related product manuals