12
Adjusting the harness
WARNING: ALWAYS ENSURE
BUCKLE TOGGLE IS SECURELY
AND CORRECTLY LOCATED
INTO SEAT.
Buckle strap must always be located
correctly into seat. It does not need
to be removed to adjust harness.
NOTE: The buckle is not removable on
some models.
8.1 If, for any reason, the buckle strap
is removed, it can be re-located by
pushing through both the buttonhole
on seat fabric and buttonhole on
seat substructure.
8.2 Ensure the buckle strap goes through
both layers of fabrics.
8.3 Your harness is fully adjustable by
moving the sliders (A), to make
tting easy. Normally, each shoulder
strap is adjusted to the same length
as the waist straps.
‘D’ rings are provided for tting a
separate harness if required (B),
complying with BS 6684. Your child
should always be harnessed in and
should never be left unattended, even
for short periods of time.
8.1
8.2
B
B
A
A
A A
8.3
To Next Page
Loading...
