Need help?Do you have a question about the Silver Cross Wayfarer Pushchair & Carrycot and is the answer not in the manual?
General| Carrying Capacity | 22kg |
|---|---|
| Maximum Child Weight | 22kg |
| Age Range | Birth to 4 years |
| Reclining Positions | Multiple |
| Safety Features | 5-point safety harness |
| Handle Height | Adjustable |
| Frame Material | Aluminum |
| Brakes | Foot-operated rear brakes |
| Harness | 5-point |
| Storage | Shopping basket |
General preparation steps before chassis assembly.
Instructions for attaching the front wheels to the chassis until they click.
Steps to release the chassis's folding lock mechanism.
Guide to lifting the handle upwards until the frame locks securely.
How to engage the brake and adjust the handle height for user comfort.
Steps to erect the carrycot outer by inserting metal bars into locators.
How to attach the carrycot liner to the outer shell using zips.
Securing the carrycot liner in place by fastening Velcro patches.
Instructions for placing the mattress into the base of the carrycot liner.
How to attach the hood clips onto the carrycot frame slots.
Instructions for zipping the apron onto the carrycot outer shell.
Sliding apron flap clips over attachment points inside the carrycot frame.
How to attach the bumper bar to the carrycot frame until it clicks.
Locating and connecting carrycot posts into chassis slots until it clicks.
Pulling release handles outwards to detach the carrycot from the chassis.
Pressing both ends of the bumper bar into connector points on the carrycot.
Pressing release button to detach the bumper bar from the carrycot frame.
Pressing hood clips onto carrycot frame slots and sliding hood back.
Using the Wayfarer hood in its 3 adjustable positions.
Unzipping and zipping the apron onto the carrycot outer.
Sliding apron flap clips onto attachment points inside the carrycot frame.
Unzipping and releasing Velcro to remove the carrycot liner.
Sliding the raincover over the hood and down towards the carrycot foot.
Instructions for attaching the seat unit to the chassis in forward or rearward facing.
Sliding the back of the hood over the seat unit and onto the recline lever.
Attaching hood clips to seat unit frame and securing lower front corners.
Threading the harness through button holes and securing the buckle.
Placing metal ends of bumper bar into seat unit fixing points until it clicks.
Clipping apron flap onto seat frame and folding over bumper bar.
Connecting seat unit chassis posts to chassis attachment slots until it clicks.
Pulling seat release handles outwards to lift the seat unit clear.
Inserting buckle clips into each side of the buckle until they click.
Pressing the buckle button to release and separate the harness clips.
Adjusting harness length using slides for a secure and comfortable fit.
Adjusting shoulder strap height by threading buckle through seat unit back flap.
Pressing hood clips onto seat frame slots at chosen height.
Using the seat unit hood in its 3 adjustable positions.
Clipping apron flap onto seat frame and folding over bumper bar.
Sliding raincover over hood and down towards seat unit toe, securing with Velcro.
Placing metal ends of bumper bar into seat unit fixing points until it clicks.
Pressing release button to detach bumper bar from seat unit for access.
Lifting recline lever to adjust seat unit position to upright, semi-recline, or full recline.
Pressing adjuster buttons to move footrest to lowest, then lifting to desired position.
Ensuring the swivel wheels are locked before folding the chassis.
Engaging the brake pedal before initiating the folding process.
Steps to fold the chassis by pressing release button and lowering handle.
Pressing down on the red brake pedal to engage the parking brake.
Gently pressing the green brake release button to disengage the brake.
Rotating the swivel release lever sideways to lock the front wheels into a fixed position.
Pressing and holding button, sliding handle down to its lowest point.
Sliding handle up or down to required height and releasing button to lock.
Locating adaptors onto chassis posts and ensuring they click into place.
Placing Simplicity Infant Carrier onto adaptors and ensuring it clicks securely.
Pressing silver button on right adaptor until it clicks.
Pressing left adaptor button and lifting carrier to detach.
Pressing circular button on adaptor side to pull adaptor upwards and release.
Checking for wear, lubricating moving parts, and cleaning metal work.
Fabric wash instructions, keeping away from heat and sunlight.
To Next Page