OPERATION BUTTONS
OPERATION BUTTONS
When the Direct Patterns ",,,"andAGroup
Pattern " " are selected, the machine will
immediately sew 3 locking stitches when the Auto-
lock button is pressed, then automatically stop.
The LCD screen will display the figure " " until the
machine is stopped.
Auto-lock button
Select one pattern (except A Group Patterns 00,
14-27 and the Direct Patterns ",,,,,,"),
press the Auto-lock button, the machine will sew 3
locking stitches at the end of the current pattern
and automatically stop. The LCD screen will display
the figure " " until the machine is stopped.
The function will be cancelled if you press the
button once again or select another pattern.
Needle up/ down position button
With the Needle up/down position button, you
decide whether the needle shall stop in the up
position or in the material when you stop sewing.
Press the button so that the arrow, on the LCD
screen, will point upward " " and the needle will
stop in the highest position. When you press the
button so that the arrow points downward " ",
the machine will stop with the needle in the
lowest position.
24
To Next Page
Loading...
