General Information 1-5
Vehicle Certification, Tire Placard,
and Anti-Theft Label
4992823
Vehicle Certification Label
Callout Description
A vehicle-specific Certification label is attached to the vehicle's center pillar (B-pillar) and displays the following assessments:
1 Logo
2
Final Date of Manufacture (Month and Year MM/YY)
Date of manufacture is to reflect the date that the vehicle is counted as built. In those cases where a replacement
label is needed, the replacement label should reflect the actual build date not the date of replacement.
3 Name of Manufacturer
4 Maximum Gross Vehicle Weight Rating (GVWR)
5 Maximum Gross Axle Weight Rating (GAWR) - Front
6 Maximum Gross Axle Weight Rating (GAWR) - Rear
7 Certification Statement
8 Vehicle Identification Number (VIN)
9 Engineering Model Number
10 Vehicle Class Type (Pass Car, etc.)
11 Original Equipment Rim Size
12 Original Equipment Tire Size
13 Paint Code
14
QR Code
Once the QR code is scanned, the information will appear in this order on your smartphone or laptop: VIN, Model
Year, Model, Build Month, Year, Engineering Book, Vehicle Order Number, 3 Digit RPO Codes sorted
alphanumerically and the Paint Code (same code appears the lower left of the QR code)
2022 - Silverado 1500 (New) Electrical Body Builder Manual
To Next Page
Loading...