Silvercrest 354199 2010 - Page 80

80
Gi
In the default setting, two heating phases are pre-
programmed.
• First stage: 00:00 - 06:00, standard value is 17 °C
• Second stage: 06:00 - 09:00, standard value is 21 °C
• Third stage: 09:00 - 17:00, standard value is 17 °C
• Fourth stage: 17:00 - 23:00, standard value is 21 °C
• Fifth stage: 23:00 - 24:00, standard value is 17 °C
In the case of days which are not programmed, the
preset heating and energy-save times remain active.
1� Press the Menu button (10 a) and keep it
pressed until the menu appears.
2� Select the menu option
. Press the OK but-
ton (10 b) to conrm your selection.
appears in the display (3) as well as the se-
lected day/range of days (6). If you want to set
an individual program for a range of days, use the
Setting wheel (5) to select the corresponding entry.
3� Select the day/range of days (6).
Press the OK button (10 b) to conrm your se-
lection�
4� Set the start of the 1st heating time (
).
Press the OK button (10 b) to conrm your in-
put.
5� Set the heating temperature. Press the OK but-
ton (10 b) to conrm your input.
6� Set the start of the 1st energy-save time (
).
Press the OK button (10 b) to conrm your in-
put.