SWC 3100 B1 GB
│
IE
│
7 ■
Cable winder
A cable winder 5 is arranged on the base 4 of the appliance. This winder 5
allows you to adjust the length of the cable to your local requirements.
CAUTION! PROPERTY DAMAGE!
► Always guide the cable through the corresponding recess on the base 4,
which is intended for this purpose, in order to ensure stability.
Initial use
WARNING! RISK OF INJURY!
► Always and only use freshly drawn mains water in the kettle! Do not consume
any water that is not certified as potable. If you do, you are taking a risk
with your health!
Before starting the appliance up, make certain that …
– the appliance, plug and power cable are in a serviceable
condition and …
– all packaging materials have been removed from the appliance.
1) Open the lid by pressing on the release button 1.
2) Fill the appliance with water up to the MAX mark and let it come to a full
boil once – as described in the next section.
3) After it has boiled, pour this water away.
4) Rinse the kettle out with clear water.
5) Refill the appliance with water up to the MAX mark, and then bring it to the
boil. When done, pour this water away also.
6) Rinse the kettle out with clear water.
The appliance is now ready for use.
IB_373596_SWC3100B1_LB8.indb 7 03.08.2021 15:54:51
To Next Page
Loading...
