Silvercrest 377068 2110 - Setting Up and Mains Connection; Unpacking Instructions; Packaging Disposal

■ 8
│
GB
│
IE SEAD 1800 A1
Setting up and connecting to the mains
powersupply
Unpacking
♦ Remove all parts of the appliance and the operating instructions from the
packaging.
♦ Remove all packing material.
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTICE
► If possible retain the appliance's original packaging during the warranty
period, so that, in the event of a warranty claim, you can ideally pack the
appliance for its return.
IB_377068_SEAD1800A1_LB8.indb 8 09.12.2021 10:05:20