GB
│
IE
│
3 ■
SHAC 2400 C2
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated. Dispose of packaging material that is no
longer needed according to the regionally established regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
appliance ideally for its return.
Appliance description
Figure A:
1 Air intake grill
2 Suspension loop
3 Blower level switch (2 levels)
4 Heater level switch (3 levels)
5 Cooling level button
(cool shot function)
Figure B:
6 Volume diffuser
7 Wide styling nozzle (for fast drying)
8 Narrow styling nozzle (for precise styling)
Technical data
Mains voltage 220 – 240 V ∼ (alternating current), 50/60 Hz
Nominal power 2000 – 2400 W
Protection class
II /
(double insulation)
To Next Page
Loading...
