EasyManua.ls Logo

Silvercrest COOK 'N' MIX - Preparing Soups; Programmes; Operating the Appliance; Before First Use

Silvercrest COOK 'N' MIX
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 
GB
IE
SMK 1000 B3
Before first use
Remove all packaging materials from the ap-
pliance and the protective film from the control
panel 0.
WARNING! RISK OF INJURY!
Take great care when handling the blades 6.
Wipe the lid 9, blades 6 and sensor 7, as
well as the outside of the blender jug 5 with
a damp cloth to remove any possible transport
residues.
Rinse out the blender jug 5 with water and a
little washing up liquid and then afterwards with
clear water so that no washing up liquid residue
remains.
Ensure that all parts are completely dry before
operating the appliance.
Programmes
FEIN
w
Use this function to make creamy soups, such as
cream of pumpkin or cream of potato soup.
The contents of the appliance will be heated and
pureed. This programme runs for 21 minutes.
GROB
e
Use this function to prepare and heat soups that
contain small chunks (e.g. vegetable pieces). The
content of the appliance are heated and slightly
pureed. This programme runs for 28 minutes.
KOMPOTT
r
Use this function to prepare compote, such as pear
compote. The contents of the appliance will be
heated but not pureed. This programme runs for
13 minutes.
SMOOTHIE
t
Use this function to blend or froth up the contents
without heating; for instance, to make smoothies or
milkshakes.
This programme runs for 2 minutes.
MIXER (blending without heating)
z
Use this function to mix ingredients without heating
them. You can use this function, for instance, to
puree soups that are too chunky.
WARMHALTEN
u
This programme can be used to keep the finished
soup at a temperature of about 90°C for up to
60 minutes.
Operating the appliance
NOTE
During first use, you might notice a slight
odour or smoke due to production residues
on the heating element. This is normal and
not a malfunction of the appliance! Ensure
sufficient ventilation; for example, by opening
a window.
NOTES
Always fill with liquid up to at least the MIN -
1300 ml marking.
Do not fill above the MAX - 1600 ml mark-
ing! Otherwise the appliance can overflow!
After completion of the programmes FEIN
w, GROB
e and KOMPOTT r,
you must allow the appliance to cool down
for about 5 minutes before starting another
programme that generates heat (FEIN
w,
GROB
e and KOMPOTT
r).
Preparing soups
1) Cut the vegetables into pieces of around 2 cm
and place these in the blender jug 5.
2) Fill the blender jug 5 up to no more than the
MAX - 1600 ml marking with water, stock
or other liquids. Always fill up to at least the
MIN - 1300 ml marking!
3) Place the lid 9 on the blender jug 5. Ensure
that the contact plug 1 in the lid 9 fits cor-
rectly in the safety socket 2.
4) Insert the connector 3 into the built-in plug 4
on the appliance.

Table of Contents

Related product manuals