SNL 15 B1
GB
│
MT
│
31 ■
NOTE
► If you want to connect the currently connected speaker to another
Bluetooth
®
device, start by pressing the 8 and 9 buttons
briefly at the same time to disconnect the currently connected
Bluetooth
®
device from the speaker. Alternatively, you can de-
activate the Bluetooth
®
function on the connected Bluetooth
®
device. You will then hear a short beep and the operating LED 6
flashes white rapidly. The speaker is now ready to be paired with
another Bluetooth
®
device.
Selecting a sound profile
You can choose between three sound profiles "Music", "Movie" and
"Voice".
♦ Press the
button 0 repeatedly to switch between the profiles.
NOTE
► If you switch off the speaker, the set sound profile is still active
when you switch it on again.
The following acoustic signals can be heard when the corresponding
sound profile is selected:
Sound profile Acoustic signal
Music 1 × beep
Film 2 × beeps
Voice 3 × beeps
IB_338000_SNL15B1_LB5.indb 31 31.07.2020 10:26:14
To Next Page
Loading...
