29 US-EN
attempt to connect to the playback device
(e.g. smartphone or computer).
Establishing a Bluetooth
®
connection:
Remove all plugs from the AUX-in jack
1
before you attempt to establish a Bluetooth®
connection.
Switch on the playback device and make
sures its Bluetooth
®
mode is on.
On the product press and hold the
button
6
for 2 seconds until the LED
5
flashes
white and a signal tone sequence sounds.
The product will now attempt to connect to
the playback device (e.g. smartphone or
computer).
The product identification on the playback
device will be „SBL TW3 A1“. On the
playback device „ACCEPT“ the connection.
To Next Page
Loading...
Need help?
General
