31 US-EN
carried out successfully, the LED
5
of the connected
“
secondary“ unit stops flashing and a sequence of beeps
will sound.
The
“
primary“ unit LED
5
will still be flashing waiting to
pair with the playback device. Once the
“
primary“ unit
has successfully paired with the playback device both
the
“
primary“ and
“
secondary“ units can be played and
controlled synchronously during Bluetooth
®
playback
mode.
Press the
button
10
again to break the TWS pairing
connection, the LED
5
on the connected
“
secondary“
unit flashes and a signal tone sequence sounds.
The product which had its button
10
pressed first will
become the
“
primary“ unit (in the left audio channel), and
the other unit will then by default become the
“
secondary“
unit (in the right audio channel).
To Next Page
Loading...