Selecting a saved station
• In order to select a saved station directly, first use the frequency selection
switch to select the frequency range where the station is saved.
• Press the
PAGE button and then use the UP or DOWN buttons to select a
memory page (from 00–39).
• Within 10 seconds press the
M.0/5–M.4/9 buttons to select a memory
space to store the station.
The station is played immediately after entering the memory space.
Carry out automatic station search
Your world receiver can search the frequencies within a range and store
the stations it finds. Do the following to activate the automatic search
(automatic memory scan/AMS):
• Press the
MEM button once. The MEM message flashes.
• Hold down the
MEMORY SCAN button for about 1 second.
The world receiver now searches all frequencies in the currently selected
frequency range and saves the stations it finds from the currently set memory
page and memory space.
Displaying memory spaces
• Press the MEMORY SCAN button to call up the content of all station memo-
ries for the selected band.
All stored stations will be played in succession for about 15 seconds.
• Press the button
SNOOZE to finish the rendering of the memory positions.
Note:
Please take note that with this the snooze function will be activated.
Repeatedly press the button
SNOOZE until 00 appears in the display.
- 28 -
IB_KH2032_53141_LB4 27.07.2010 14:22 Uhr Seite 28
To Next Page
Loading...
