Navigation Device PNA-M4310 English
13
Recharging from a Computer
1. Plug the Mini-USB connector of the USB cable
[page 1, item 5] into the receptacle [page 9, item 9]
of your navigation device.
2. Plug the USB connector of the cable into a USB port
on your computer. If your navigation device was in
standby mode it will power on automatically.
3. The charging process starts automatically, and the
charger indicator [page 9, item 4] lights orange. At
the same time the computer will detect and connect
a mass storage device (see page 52 – Connecting
to a Computer).
To Next Page
Loading...