English Navigation Device PNA-M4310
16
Connecting an External GPS Antenna
If required, you can connect a conventional external GPS
antenna to your navigation device. This might be necessary
when using the device in a vehicle with a vertical windshield
(like a truck or bus) obstructing the sight to the sky. Also,
some modern vehicles have a metallised windshield causing
a shield effect to the GPS signals.
The external antenna must have an SMB connector in order
to connect it to the corresponding receptacle [page 9, item 2]
on the navigation device.
The device will receive the signals from the additional
antenna automatically: no further settings are required.
To Next Page
Loading...