English Navigation Device PNA-M4310
32
To enable the speed limit warning:
1. Tap the Enable Warner checkbox. A checkmark will
appear in the checkbox.
2. In addition to the optical warning you can also
enable an acoustic warning. To do this, tap the
Warning tone checkbox.
i
To disable any of these functions, tap the
corresponding checkbox again. The
associated checkmark will be removed.
3. Next select a tolerance value. When exceeding this
tolerance the warning will be output. To do this, tap
the desired button:
Triggers the warning when exceeding
the speed limit by 5 km/h.
Triggers the warning when exceeding
the speed limit by 10 km/h.
Here you can set a custom tolerance
value (see page 34 – Manual Input).
4. After you have entered all information tap this
button:
5. You are returned to the General Settings menu.
Change any further settings or tap again to
return to the main menu.
To Next Page
Loading...