■ 24 │ GB
│
IE
Curling your hair
Once you have made all settings on the appliance and the Temperature indicator 7
is permanently on (temperature reached):
1) To prevent the hair from getting caught in the curling chamber 1, use the
hair template 9 to separate the strands of hair. Ensure that the strand is no
thicker than the punched hole in the hair template 9.
2) When inserting the hair strand into the curling chamber 1, the opening must
be facing towards the head. Hold the appliance around 5 cm from your
scalp. The strand must be straight and taut when it is inserted.
3) Let go of the strand and press the Start button z. The roller 2 starts to turn
and stops automatically after the set number of turns. The strand is wound
around the roller 2.
As soon as the roller 2 stops, you will hear a beep and the set time starts counting
down. As soon as the programmed time period has elapsed, you will hear three
beeps.
4) Pull the appliance away from your head so that the strand slips out of the
curling chamber 1.
5) Proceed in the same way with the other strands.
6) When you are finished styling your hair, press and hold down the On/Off
button
w until the display goes out.
7) Remove the power plug from the mains power socket.
8) As soon as the appliance has cooled down, put the protective cap 3 onto
the appliance.
To Next Page
Loading...
