8 GB/IE
Installing the camera
You will need:
Ethernet cable
Wi-Fi router (2.4 GHz 802.11b/g/n)
microSD card (up to 128 GB)
iOS device with iOS 7.0 or above or Android
device with Android 4.4X or above
Tools:
Electric drill
Cross-head screwdriver
Ø 6 mm (1/4”) masonry drill bit
Ø 16 mm (5/8”) masonry drill bit
Sealing compound e.g. silicone
A1 A2 A3
x3
22
19
19
Stick the wall mounting template
19
on the wall, eave or ceiling using the duct tape (not provided)
in the desired mounting position.
Drill 3 mounting holes (Ø 6 mm, 1/4”) (Fig.A1). Drill 1 hole (Ø 16 mm, 5/8”) in the wall for use
as a cable guide (Fig.A2).
Insert the wall plugs
22
into the mounting holes (Fig.A3).
A4
5
Pull the camera connection cable
5
through the cable hole (Fig. A4).
To Next Page
Loading...
