SilverCrest SBH 3.0 C1
18 - English
Switch headset on/off
Hold down the multi-function button (1) for approx. three
seconds to switch the headset on. The LED (2) rapidly
flashes blue several times indicating a search for the last
connected Bluetooth
®
device. The headset must be
connected to a mobile phone if this has not been done
already. Please note the instructions in the next section for
connecting your mobile phone.
Hold down the multi-function button (1) for approx. three
seconds to switch the headset off. The LED (2)flashes
orange when the headset is switched off.
Connect headset to mobile phone
Proceed as follows to connect the headset to your mobile
phone:
Switch the headset off.
Hold down the multi-function button (1) for approx. six
seconds to start pairing mode.
To Next Page
Loading...