Silvercrest SBH 5.0 A1 - 7 Getting Started; Charging the Battery

SilverCrest SBH 5.0 A1
18 - English
7. Getting started
7.1 Charging the battery
Before the first use or when the built-in battery is empty,
charge it up as follows:
 Connect the USB charging cable (F) to the Micro USB
charging port (8) and to a free USB port on your
computer (which must be switched on) or a USB power
adapter (not supplied).
 The LED (2) lights orange while the battery is charging.
When the battery is fully charged, the LED (2) goes
green.
Do not cover the headset during the charging process, as
this could cause it to overheat.
A flashing orange LED (2) indicates that the battery is
low.