SilverCrest SBH 5.0 A1
English - 19
7.2 Powering the headset on/off
Power the headset on by pressing and holding the multi-
function button (3) for about 2 seconds.
A sequence of beeps sounds, and the headset says:
Powering on
The LED (2) flashes white to indicate that the headset is
scanning for the last Bluetooth
®
device connected.
If a known device is found, the headset says:
Connected
If the headset has not yet been paired with a mobile
phone, this is the first thing to do. The next chapter
explains how to pair your mobile phone.
Press and hold the multi-function button (3) for about 3
seconds to power the headset off. The headset says:
Powering off
If an existing connection is also disconnected during
powering off, the headset also says:
Disconnected
To Next Page
Loading...