Silvercrest SBH 5.0 A1 - Pairing the Headset with a Mobile Phone

SilverCrest SBH 5.0 A1
20 - English
The LED (2) goes orange briefly when the headset is
powered off.
7.3 Pairing the headset with a mobile
phone
Proceed as follows to pair the headset with your mobile
phone:
 Power the headset off.
 Press and hold the multi-function button (3) for approx.
6 seconds to start pairing mode. Two short beeps
sound.
 The LED (2) flashes quickly in white. The headset is now
in scanning mode for about 5 minutes. In this time, you
can pair a compatible mobile phone to the headset
using the Bluetooth
®
function. To do this, start scanning
for Bluetooth
®
devices.
 Now pair your mobile phone to the headset via
Bluetooth
®
. Follow the instructions on the mobile
phone. From the list of devices found, select “SBH 5.0