Silvercrest SBLD 28 A1 - AUX in Operation

SBLD 28 A1
■ 14
│
GB
│
IE
│
NI
AUX IN operation
You can also listen to music from a portable audio device connected
via a 3.5mm jack cable.
♦ Ensure that the speaker is switched off.
♦ Connect the audio device using a 3.5 mm jack cable to the
3.5 mm jack socket
on the speaker.
♦ Set the On/Off switch
to the ON position to turn the loud-
speaker on.
♦ Start playback on the audio device and set the volume to a
moderate level.
♦ Then set the desired volume using the
( ) button or the
( ) button on the speaker.
♦ Press the
button if you want to mute the speaker.
NOTE
► If you connect a 3.5 mm jack cable to the device during the
playback of audio files via Bluetooth
®
, the device will switch
playback automatically to the newly connected device.
► If you use a smartphone as your Bluetooth
®
playback device,
the audio playback will be paused when there is an incoming
call. Acceptance/termination of the call is carried out via the
smartphone. After finishing the call, the playback will be auto-
matically continued.