EasyManua.ls Logo

Silvercrest SBLL 56 A1 - Page 34

Silvercrest SBLL 56 A1
158 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SBLL 56 A1
GB
IE 31
Ensure that the device is switched off.
If a device is switched on, the operating/
charging LED
lights up. Press the but-
ton
for approx. 2 seconds to switch off
a device.
Connect the USB plug on the charger cable
to a USB power supply.
Connect the micro-USB plug of the charging
cable
to the charging socket micro-USB
charging socket (DC 5V
) on the device.
CAUTION
Use only a mains adapter with an output
voltage of 5V and an output current of at
least 900mA or a USB 3.0 port on your
computer to charge the integrated battery.
You can recognise the USB 3.0 port due to
the blue marking.
USB 2.0 ports do not deliver sufficient power
to charge the integrated battery. Using a
USB 2.0 port can damage the computer.
NOTE
The operating/charging LED
lights up
orange during charging. When the battery is
fully charged, the charging LED turns off.
Charging takes about 5–6 hours at a charg-
ing current of 900 mA. When the battery
is fully charged, you can play back music
for about 5 hours without lighting, or up to
3 hours with lighting at a medium volume.
The playback time may vary depending on
usage (volume/lighting).
When the battery is dead, you will hear
beeps every few seconds and the operat-
ing/charging LED
flashes orange. When
the battery performance drops too low, the
speaker switches off automatically.

Table of Contents

Related product manuals