18 GB/IE
Ensure the rated voltage shown on
the rating label corresponds with
the voltage of the power supply.
Do not operate any product with
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner.
Only use the product in dry
indoor rooms.
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
Do not insert fingers or foreign
objects in any opening of the
product and do not obstruct the
air vents.
No action is needed from users to
shift the product between 50 and
60 Hz. The product adapts itself
for both 50 and 60 Hz.
Regularly check the power plug
and power cord for damage.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally.
If the power cord should overheat,
stop using the product and
disconnect the product from the
electrical outlet.
Do not pull the power plug out of
the electrical outlet by the power
cord. Do not wrap the power cord
around the product.
To Next Page
Loading...
