SilverCrest SCAW 5.00 B2
English - 267
Troubleshooting
You can solve most common problems yourself using the table below. If the problem persists
after checking the suggested solutions, please contact our Service Hotline (see page 271).
Do not attempt to repair the product yourself.
Problem Solution
Unable to power the
camcorder on.
The battery pack is empty. Recharge the battery.
The camcorder suddenly
powers off.
The battery pack is empty. Recharge the battery.
The camcorder suddenly
powers off.
Auto power off is enabled. Check the settings (see
page 228).
The camcorder fails to respond
and cannot be switched off.
Remove the battery pack for a few seconds and re-
insert it.
Unable to disable motion
detect.
The device is still recording. First stop recording by
pressing the Recording button (7) and then press the
Menu button (14). (See page 240).
To Next Page
Loading...
