GB
│
MT
│
21 ■
SDM 1500 D2
Safety instructions
RISK OF ELECTRIC SHOCK!
► Connect the appliance only to mains power sockets
supplying a mains power voltage of 220 – 240V ∼,
50/60 Hz.
► In the event of operating malfunctions, and before cleaning
the appliance, disconnect the plug from the mains power
socket.
► To disconnect the power cable, always pull the plug from
the socket, do not pull the power cable itself.
► Do not kink or crush the power cable, and route the cable
so that it cannot be stepped on or tripped over.
► To avoid risks, arrange for defective plugs and/or power
cables to be replaced at once by qualified technicians or
our Customer Service Department.
► Make sure that the power cable does not become wet or
damp during use. Route the cable in such a way that it
cannot be crushed or damaged.
► To prevent risks, stop using the appliance immediately if it is
damaged.
► Disconnect the appliance from the mains power socket before
filling it with water, changing accessories or cleaning it.
Use the appliance only in dry indoor areas, not
outdoors.
► Never submerse the appliance in water or other liquids!
► Never aim the steam jet directly at electrical appliances or
equipment which contains electrical components, such as
the interior of ovens.
► Operate the appliance only with dry hands and never
without shoes (i.e. not barefoot). This will help reduce the
effect of an electric shock in the event of a malfunction.
► Never aim the appliance at moisture-sensitive objects.
To Next Page
Loading...
