SilverCrest SEMK 105 B2
8 - English
• When disconnecting the power cable from the mains socket,
always pull on the mains plug and never on the power cable
(10) itself.
• If you notice visible damage to the ice cube maker or the
power cable (10), switch the ice cube maker off immediately,
disconnect the mains plug from the mains socket and contact
our hotline.
• In order to completely disconnect the device from the mains,
the power plug must be pulled out from the mains socket.
Therefore, only connect the ice cube maker to a properly
installed mains socket which is easy to access and for which
the mains voltage corresponds to that stated on the rating
plate. After connecting the device, the mains socket must still
be easily accessible so that you can remove the mains plug
quickly in the event of an emergency.
• Do not immerse the ice cube maker in water or any other
liquids. If liquids have entered the ice cube maker, disconnect
the mains plug from the mains socket immediately and
contact customer service.
DANGER: Risk of fire
• This product contains a small amount of isobutane (R600a)
as a refrigerant, this is a natural, environmentally-friendly gas
which is flammable. In the event of a leak, disconnect the
mains plug and avoid naked flames and ignition sources.
Ventilate the room the ice cube maker is in and contact our
hotline.
• Do not store explosive materials such as aerosol containers
with flammable propellants in the device.
To Next Page
Loading...
