SilverCrest SEMK 105 B2
English - 9
• Make sure there is nothing obstructing the ventilation grilles
(9, 11) in the device housing. Set the ice maker up so that
there is nothing blocking the ventilation grills (9, 11) or the
fan outlet (7). The device needs clearance of around 20 cm
all round.
• Do not use an extension cable to operate the ice cube maker.
• The device does not require constant supervision when in
use, but do check on it regularly.
WARNING! Risk of injury
• There is a risk of choking when enjoying drinks with ice
cubes. Risk of suffocation!
• Only use drinking water in the ice cube machine, never use
other liquids.
• To prevent mould forming, never leave water in the water
reservoir (13) for longer than 24 hours. Drain old water and
top up again.
• Do not store food in the ice cube maker.
• Do not fill the water reservoir (13) with hot water.
• Only use the accessories supplied.
• Never turn the ice cube maker upside down when in
transport.
• After transporting the ice cube maker, leave it at least 2 hours
to settle before use.
CAUTION! Risk of damage to property
• Never attempt to speed up the defrosting process by using
agents not recommended by the manufacturer.
To Next Page
Loading...
